IWS65
Double section wall mounted network cabinet
Part No.: ID-IWS65
Material: SPCC high-quality cold rolled steel
Size: 4U-18U
Depth: 550mm
Protection grade: IP20
Package: Disassemble
Color: black/gray
OEM: Welcome
● Assembling frame construction,strength is good, and
can load 60 Kg
● Wall-mounted installing method , can realize locale
quickly installing
● Wire channels and air holes on top and at bottom
● dismantable
● Protection grade:IP20
● SPCC High-quality cold roll steel;
● Thickness: 1.5 mm for mounting rails and 1.0 mm for
others
● The surface finish: Degreasing, pickling,phosphoric,
static electricity,power coat
STANDARDS Meet ANSI/EIA RS-310-D, DIN41491,
PART1, IEC297, PRAT7,GB/T3047.2-42 requirement
Compatible with 19” International Standard, the ETSI
Standard
Model No. Specification Width * Depth * Altitude
IWS6406 6U 0.4M 600*550*365
IWS6409 9U 0.5M 600*550*505
IWS6412 12U 0.6M 600*550*635
IWS6415 15U 0.8M 600*550*765
IWS6418 18U 1.0M 600*550*900
Standard Configuration:
S/N | Name | Quantity | Unit | Material | Surface finish | Remark |
1 | Top cover | 1 | Piece | 1.0mm SPCC cold rolled steel | Electrostatic spray | — |
2 | Bottom cover | 1 | Piece | 1.0mm SPCC cold rolled steel | Electrostatic spray | — |
3 | Frame | 2 | Piece | 1.0mm SPCC cold rolled steel | Electrostatic spray | — |
4 | Back panel | 1 | Piece | 1.0mm SPCC cold rolled steel | Electrostatic spray | — |
5 | Front door | 1 | Piece | 1.0mm SPCC cold rolled steel | Electrostatic spray | — |
6 | Side panel | 2 | Piece | 1.0mm SPCC cold rolled steel | Electrostatic spray | — |
7 | Mounting profile | 4 | Piece | 1.5mm SPCC cold rolled steel | SGLC | — |
8 | T-type Allen wrench | 1 | Piece | — | — | — |
9 | M6 square screw & nut | 10 | Sets | — | — | 4 sets for lower 12u |
Network cabinet is not a simple cabinet used to install network equipment. For the good operation of network equipment, network cabinet plays a crucial role
Where is the collateralized cabinet mainly used?
As an indispensable item in the computer industry, network cabinet is mainly used in various computer rooms, including network wiring room, floor wiring room, central room, data room, network cabinet, control center, monitoring room, monitoring center, etc., widely used in network cabling, computer room, radio and television and other project engineering fields.
Can the network cabinet be replaced by ordinary wooden shelving No.
The role of network cabinet is to place network equipment, from this function, ordinary wooden shelving can play the same role, but the difference is that the network cabinet is more reasonable, more scientific, is specially designed for storing network equipment, some also have enhanced electromagnetic shielding, reduce working noise and other functions, ordinary shelving can not play such a role.
A network cabinet is a rectangular cabinet consisting of a frame and a cover plate. Network devices such as switches, optical fiber adapters, and optical fiber distribution frames are mainly installed in the cabinet. Network cabinets have many functions, including the following:
1. Place network devices in a cabinet to reduce the footprint of the devices.
2. The network cabinet can accommodate the largest number of network equipment, which can simplify the layout of the room and improve the overall appearance of the room.
3. Network equipment emits the most heat when working. The heat dissipation fan of the network cabinet can send the heat from the equipment out of the cabinet to ensure the safe and stable operation of the equipment and ensure the safety and stability of the equipment.
4. Some specially designed network cabinets also enhance electromagnetic shielding, reduce working exposure, filter air and so on.